7:24 Taper Tool Holder- BT chuck series
BT is the symbol of JIS 7/24 cone used since 1969 MAS403 Spec, called the MAS403-BT, which is the earliest ATC (Automatic Tool Changer) 7/24 cone specification. In 1998, Japan publishes JIS B 6339:1998 and uses it to replace MAS403; in 2007, ISO 7388-2:2007 becomes the new 7/24 BT outer-cone specification.
BT tool holder is named as ISO JBT. AD tool holder with center-through cooling hole is called the ISO JD. BT B tool holder flange-end with cooling hole is called the ISO JF. BT AD/B tool holder combines both the inner-cooling methods and is called the ISO JD/F.
7:24 Taper Tool Holder- SK chuck series
SK is the symbol of DIN 69871 7/24 cone; JT is the China selected from ISO7388-1:1983; in 2007, ISO7388-1:2007 is 7/24.
SK (JT) new outer-cone specification SK (JT) tool holder is named as the ISO A.
SK AD (JT AD) tool holder with center-through cooling hole is called the ISO AD.
SK B (JT B) tool holder flange-end with cooling hole is called the ISO AF.
SK AD/B (JT AD/B) tool holder combines both the inner-cooling methods and is called the ISO AD/F.
Hollow short cone Tool Holder- HSK chuck series
HSK is the hollow short cone Tool Holder; developed by University of Achen (Germany) in 1991; in 1993, it became DIN 69893-1~6:1993, including A, B, C, D, E & F cones. In 2001, it became ISO12164-1:2001, which changes the original 1/10 taper into 1/9.98, ensuring the large end of hollow-short cone can contact substantially while the taper contacts both sides of ends.
1. ISO was founded on 1947-2-23; it is an institute assigned to build the worldwide international industrial & business standards.
2. DIN was founded in 1917; targeted to drive the reasonability, certified quality, safety and environmental protection; and the communication among enterprises, technologies, sciences, governments and the public.
3. JIS (Japan Industrial Standard): In Japan, the Standards can be divided to the national standards, group standards and company standards. JIS is a national standard level. It is categorized into the basic standard, methodology standard and product standard. In addition, in 1996, Japan Authority cooperated with the rapid development of modern technologies, avoiding the national standards from unable to keep pace with technical innovation, it drove the standard information system (JIS/TR), expecting to have positive discussion and acquire technical consensus on standardization before forming JIS Standards, facilitate to the setting procedure of JIS standards.
CHUMPOWER machinery Corp. possesses the copyright of this article. It is not allowed for any form of reprinting or distribution without the authorization and indication of source.Wereserve the right to claim for its legal right. Contact us if you have any questions or intents to reprint this article. Marketing Department: firstname.lastname@example.org